Home Products/Services Agent Locator FAQs Site Map Contact Us Log-in
Search
Bell Isolation Systems

Products

>
>
>
>
>
>

Services

>
>
>
Print this page

Wall Mounted Transfer Chamber with PLC Controlled Electronic Interlock 

Wall Mounted Transfer Chamber with PLC Controlled Electronic Interlock

PLC Controlled Electronically Interlocked Transfer Chambers are designed to enable chemical disinfection or sterilisation of materials transferred from an uncontrolled area (dirty side) into a controlled area (clean side).

The chambers are manufactured complete with connection and sealing flanges to enable installation through a suitable aperture in a wall, partition or door and provides a hermetic seal between the two areas when fitted.  A range of standard sizes are available or custom manufactured to specific requirements.

The chamber doors are electronically interlocked to prevent both doors from being opened at the same time or out of sequence.  The PLC control system also provides timed disinfection cycles which can be programmed to suit transfer requirements.

Standard Features

  • Thermally formed and welded clear PVC chamber body with integral door seal and fixed wall connection flange.
  • Separate two section slot-over flange, creates a clamp seal to the wall, partition or door.
  • Clear Perspex inner and outer doors with stainless steel hinges and compression latch.
  • Electronic Interlock System with PLC controls and timed cycles for  H2O2 and disinfectant spray decontamination/sterilisation.
  • LCD panel displays cycle mode and cycle minutes remaining.

Optional Features

  • Chamber body can be manufactured from stainless steel.
  • Internal stainless steel/PVC shelving.
  • Sleeve ports - can be fitted to the inner and outer doors and side walls to allow the operator to manipulate the load during disinfectant spray procedures with doors closed and interlock engaged.
  • HEPA filtered connection system can be fitted to enable load decontamination/sterilisation using a Bioquell or Steris H2O2 Bio-Decontamination Unit.
  • HEPA filtered ventilation system for post disinfection purging of the chamber.
  • Cycle fail alarm system with auduble and visual warning. (Ventilated systems only)
  • Chamber body support frame - provides additional support for an exceptionally long chamber body.

Back to sections

Request a quotation
Further information for clients

© Bell Isolation Systems Ltd, Unit 12a, Oakbank Park Way, Livingston, EH53 0TH, Scotland, UK info@bell-isolation-systems.com